UXB02070G4TR100中文资料(4)

UXA 0204, UXB 0207, UXE 0414

High Precision Leaded Resistors

E

Vishay Beyschlag

PACKAGING

MODELUXAUXBUXE

REEL

BANDOLIER ON REEL

1000100050002500

CODER1R1RPR2

PIECES/BOX

100100010010001001000

BOX

CODECUC1CUC1CUC1

TEMPERATURE COEFFICIENT AND RESISTANCE RANGE

TCR

DESCRIPTION

TOLERANCE± 0.25 %

± 0.1 %± 0.05 %± 0.01 %± 0.25 %

± 05 ppm/K (2)

± 0.1 %± 0.05 %± 0.01 %± 0.25 %

± 02 ppm/K (3)

± 0.1 %± 0.05 %± 0.01 %

RESISTANCE VALUE UXA 020422 Ω to 221 kΩ43 Ω to 221 kΩ100 Ω to 180 kΩ200 Ω to 150 kΩ47 Ω to 150 kΩ47 Ω to 150 kΩ100 Ω to 150 kΩ200 Ω to 150 kΩ100 Ω to 100 kΩ100 Ω to 100 kΩ150 Ω to 100 kΩ200 Ω to 100 kΩ

UXB 020710 Ω to 1 MΩ10 Ω to 1 MΩ24 Ω to 301 kΩ24 Ω to 301 kΩ10 Ω to 1 MΩ10 Ω to 1 MΩ24Ω to 221 kΩ24 Ω to 221 kΩ100 Ω to 150 kΩ100 Ω to 150 kΩ150 Ω to 150 kΩ200 Ω to 150 kΩ

UXE 0414

-22 Ω to 511kΩ100 Ω to 301kΩ

--47 Ω to 301kΩ100 Ω to 301kΩ

-----

± 10 ppm/K (2)

Notes:

(1) Resistance values to be selected from the E192 series, for other values please contact the factory.(2) TCR 10 and TCR 05 are specified over the temperature range from - 20°C to + 85°C.(3) TCR 02 is specified over the temperature range from 0°Cto + 60°C.

DESCRIPTION

Production is strictly controlled and follows an extensive setof instructions established for reproducibility. Ahomogeneous film of metal alloy is deposited on a high gradeceramic body (85 % Al2O3) and conditioned to achieve thedesired temperature coefficient. Nickel plated steeltermination caps are firmly pressed on the metallized rods.Special laser devices are used repeatedly to achieve thetarget value by slowly and smoothly cutting a helical groovein the resistive layer without damaging the ceramics. Afurther conditioning is applied in order to stabilise thetrimming result. Connecting wires of electrolytic copperplated with pure tin are welded to the termination caps. Theresistors are covered by protective coating designed forelectrical, mechanical and climatic protection.Theterminations receive a final pure tin on nickel plating. Scriptmarking designates the resistance value plus coded TCRand tolerance.

The result of the determined production is verified by anaccelerated ageing (burn-in) and extensive testingprocedure performed on 100 % of the individual resistors.Only accepted products are stuck directly on the adhesivetapes in accordance with IEC 60286-1.

Document Number: 28726Revision: 21-Aug-07

ASSEMBLY

The resistors are suitable for processing on automaticinsertion equipment and cutting and bending machines.Excellent solderability is proven, even after extendedstorage. They are suitable for automatic soldering usingwave or dipping. The encapsulation is resistant to allcleaning solvents commonly used in the electronics industry,including alcohols, esters and aqueous solutions. Thesuitability of conformal coatings, if applied, shall be qualifiedby appropriate means to ensure the long-term stability of thewhole system.

APPROVALS

Where applicable, the resistors are tested in accordance withCECC40101-806 which refers to EN 60115-1 and EN 140100.

Vishay BYSCHLAG has achieved "Approval ofManufacturer" in accordance with EN 100114-1

87