T496D475K025AT中文资料(4)

元器件交易网

TANTALUM AND ALUMINUM CHIP CAPACITORS

Packaging Information

Labeling:Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.

Refer to EIA-556.

QUANTITIESPACKAGEDPERREEL

Case CodeKEMETEIAR2012-12S3216-12T3528-12U6032-15W7343-15V7343-20A3216-18B3528-21C6032-28D7343-31Y7343-40X7343-43E7260-38

Tape

Width-mm

888121212881212121212

7" Reel*2,5002,5002,5001,0001,0001,0002,0002,000500500500500500

13" Reel*10,00010,00010,0005,0003,0003,0009,0008,0003,0002,5002,0002,0002,000

* No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging.92

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

元器件交易网

TANTALUM, CERAMIC ANDALUMINUM CHIP CAPACITORS

Packaging Information

Performance Notes

1.Cover Tape Break Force: 1.0 Kg Minimum.

2.Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:

Tape WidthPeel Strength

8 mm0.1 Newton to 1.0 Newton (10g to 100g)12 mm0.1 Newton to 1.3 Newton (10g to 130g)

The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carriertape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tapeshall be pulled at a velocity of 300 ±10 mm/minute.

3.Reel Sizes:Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")reels (with C-7280). Note that 13” reels are preferred.

beling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.Refer to EIA-556.

Embossed Carrier Tape Configuration: Figure 1

Table 1 — EMBOSSEDTAPEDIMENSIONS (Metric will govern)