华为策略路由配置实例(2)

3、操作步骤

3.1、创建VLAN并配置各接口

# 在Switch 上创建VLAN100 和VLAN200。

vHUAWEI> system-view

[HUAWEI] sysname Switch

[Switch] vian batch 100 200

# 配置Switch 上接口GE1/0/1、GE1/0/2 和GE2/0/1 的接口类型为Trunk , 并加入VLAN100 和VLAN200。

[Switch] in terface gigabitethernet 1/0/1

[Switch-GigabitEthemet1/0/1] port lin k-t ype trunk

[Switch-GigabitEthernet1/0/1] port trunk allow -p ass vlan 100 200 [Switch-GigabitEthernet1/0/1] quit

[Switch] in terface gigabitethernet 1/0/2

[Switch-GigabitEthernet1/0/2] port lin k-t ype trunk

[Switch-GigabitEthernet1/0/2] port trunk allow -p ass vlan 100 200 [Switch-GigabitEthernet1/0/2] quit

[Switch] in terface gigabitethernet 2/0/1

[Switch-GigabitEthernet2/0/1] port lin k-t ype trunk

[Switch-GigabitEthernet2/0/1] port trunk allow -p ass vlan 100 200 [Switch-GigabitEthernet2/0/1] quit