aruba操作手册(2)

(Aruba-master) >enable Password:******

二 VLAN的创建

(Aruba-master) #configure terminal

Enter Configuration commands, one per line. End with CNTL/Z

(Aruba-master) (config) #vlan 200

(Aruba-master) (config-subif)#interface vlan 200

(Aruba-master) (config-subif)#ip address 172.16.51.2 255.255.255.0

(Aruba-master) (config-subif)#interface loopback (Aruba-master) (config-loop)#ip address 172.16.51.3

Switch IP Address is Modified. Switch should be rebooted now.

(Aruba-master) (config) #interface vlan 1 (Aruba-master) (config-subif)#no ip address

(Aruba-master) (config-loopinterface fastethernet 1/0 )#(Aruba-master) (config-if)#switchport access vlan 200 (Aruba-master) (config-if) #exit

三 配置缺省路由

(Aruba-master) (config) # ip default-gateway 172.16.51.1

(Aruba-master) exit

(config) #(Aruba-master) #write mem Saving Configuration...

Configuration Saved

(Aruba_2400_Test_System) #reload

Do you really want to reset the system(y/n): y System will now restart!

配置完成后，可以用https://172.16.0.254 登陆控制器进行WEB来进行管理