DF12D-36DS-0.5V中文资料(9)

元器件交易网

BPrecautions for Use

1.Recommended Temperature Profile (SMT)

Note 1 : Maximum twice action is allowed under the same condition. However, the interval

between the first and second actions must be maintained at the room temperature.

Note 2 : The temperature indicates the board surface temperature In the connector lead area.

2.Recommended Manual Soldering Condition (SMT)

Soldering iron temperature: 290±10ç, Soldering time: Within 2 seconds

When the 0.15mm thickness is used, set the metal mask open area to 85% as a target.

4.Board Warp(SMT)5.Cleaning Condition6.Cautions

Maxmum 0.02mm in the connector center area, based on both connector edgesRefer to "Nylon Connector Use Hand book".

sThe receptacle is designed in a structure where contacts are exposed. Touching it with bare hands would cause contact failure or electrostatic element damage.

scontact deformation.

sthan the connector.

sExcessive scoop insertion or extraction may result in damage.

sblister on the connector.

sThe color phase of this product may be slightly different from that of the formed productaccording to the manufacturing lot. However, the difference doesn't affect the performance.

3.Recommended Screen Thickness (SMT)0.12mm

A307