7800R说明书(14)

FT-7800说明书!

功能：选择智能区段搜索模式

Available Values: SINGLE/CONT

选项：单次搜索 / 连续搜索

Default: SINGLE

默认值：单次搜索

SINGLE: The transceiver sweeps the current band once in each direction starting on the current frequency. All channels where activity is present (up to 15 in each direction) are loaded into the Smart Search memories. Whether or not all 31 memories are filled, the search stops after one sweep in each direction.

单次搜索：本机以当前波段的当前频率为中心开始搜索，搜索上下两个方向各15个有信号 的频率并将数据存入智能搜索存储器。无论31个存储器是否存满，本机在上下两个方向都 只进行一次搜索后便自动停止。

CONT: The transceiver makes a sweep in each direction as with the “Single” mode, but if all 31 channels are not filled after the first sweep, the radio continues sweeping until they are all filled.

连续搜索：本机在上下两个方向进行与单次搜索相同的动作。但是第一次搜索后如果31个 存储器没有被存满，本机将继续进行搜索直到所有存储器被存满为止。

Menu #37 [SCAN]

菜单#37[SCAN]

Function: Selects the Scan-Resume mode.

功能：选择恢复扫描的模式

Available Values: TIME/BUSY/HOLD

选项：时间 / 繁忙 / 锁定

Default: BUSY

默认值：繁忙

BUSY: The scanner will halt on a signal it encounters. Two seconds after the carrier has dropped because the other station(s) ceased transmission, the scanner will resume.

繁忙：扫描将停在发现的一个信号频率上。当发射台终止发射，该载波消失2秒钟以上，本 机会自动继续扫描。

TIME: The scanner will halt on a signal it encounters, and will hold five seconds. If you do not take action to disable the scanner within five seconds, the scanner will resume even if the stations are still active.

时间：扫描将停在发现的一个信号频率上5秒钟。如果在这5秒钟内没有任何动作取消扫描 操作，本机将无条件继续扫描其他信号。

HOLD: The scanner will stop when a signal is received, and will not restart.

锁定：扫描将停在发现的一个信号频率上，不再继续扫描操作。

Menu #38 [SCN MD]

菜单#38[SCN MD]