7800R说明书(16)

FT-7800说明书!

Available Values: SPL.OFF/SPL.ON

选项：开启 / 关闭

Default: SPL.OFF

默认值：关闭

When this Menu Item is set to “ON,” you can see the following additional parameters after the “DCS” parameter while selecting the Menu #42: SQL.TYP.

当本项被设置为开启（SPL.ON）时，在菜单#42中的数字编码静噪（DCS）会增加下列参 数。

D: DCS Encode only(the “DCS” icon will blink during operation)

D：仅使用DCS数字编码静噪编码（在操作时“DCS”标志闪烁）

ENC DCS: Encodes a CTCSS Tone and Decodes a DCS code (the “DCS” and “ENC” icons will appear during operation)

ENC DCS：使用CTCSS哑音编码和DCS数字编码静噪进行解码（在操作时屏幕显示“DCS” 和“ENC”标志）

D-DEC: Encodes a DCS code and Decodes a CTCSS Tone (the “DCS” icon will blink and the “DEC” icon will appear during operation)

D-DEC：使用DCS数字编码静噪进行编码和CTCSS哑音解码（操作期间“DCS”标志闪烁， 同时“DEC”标志会出现在屏幕上）

Select the desired operating mode from the selections shown above.

请在上述项目中选择你需要的操作模式。

Menu #42 [SQL.TYP]

菜单#42[SQL.TYP]

Function: Selects the Tone Encoder and/or Decoder mode.

功能：选择哑音和数字编码静噪的编码解码模式

Available Values: OFF/ENC/ENCDEC/REV TN/DCS

选项：OFF / ENC / ENCDEC / REV TN / DCS

Default: OFF

默认值：OFF

OFF：关闭哑音和数字编码静噪的编码解码功能

ENC: CTCSS Encoder 哑音编码

ENC DEC: CTCSS Encoder/Decoder 哑音编码/解码

REV TN: Reverse CTCSS Decoder 反相哑音解码

DCS: Digital Code Squelch Encoder/Decoder 数字编码静噪的编码/解码

Menu #43 [STEP]

菜单#43[STEP]

Function: Sets the Synthesizer steps.

功能：设置频合器的步进值

Available Values: AUTO/5.0 k/10.0 k/12.5 k/15.0 k/20.0 k/25.0 k/50.0 k/100 k

选项：自动 / 5.0 kHz / 10.0 kHz / 12.5 kHz / 15.0 kHz / 20.0 kHz / 25.0 kHz / 50.0 kHz / 100 kHz Default: Depends on the band of operation.

默认值：各个波段的默认值不同

Note: 5 kHz and 15 kHz steps are not available for use on above 700 MHz.

注释：在700MHz以上不能设置5 kHz和15 kHz的步进值

Menu #44 [TN FRQ]

菜单#44[TN FRQ]