CCNA实验手册大全(13)

115200，所以即使改register成功，启动以后router又执行speed 115200,还是不行，所以如果有这个问题，记得把这个语句no掉）

Router>en 进入新IOS的特权模式

Router#reload 重启系统

Proceed with reload? [confirm] 回车

00:01:04: %SYS-5-RELOAD: Reload requested

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. TAC:Home:SW:IOS:Specials for info

PC = 0xfff0a530, Vector = 0x500, SP = 0x680127b0 C2600 platform with 24576 Kbytes of main memory

PC = 0xfff0a530, Vector = 0x500, SP = 0x80004684

monitor: command "boot" aborted due to user interrupt

rommon 1 > confreg （ 输入“confreg”命令） Configuration Summary enabled are:

load rom after netboot fails console baud: 115200

boot: image specified by the boot system commands or default to: cisco2-C2600

do you wish to change the configuration? y/n [n]: y (选择 yes) enable "diagnostic mode"? y/n [n]: n (选择 no)

enable "use net in IP bcast address"? y/n [n]: n (选择 no) disable "load rom after netboot fails"? y/n [n]: n (选择 no) enable "use all zero broadcast"? y/n [n]: n (选择 no) enable "break/abort has effect"? y/n [n]: n (选择 no) enable "ignore system config info"? y/n [n]: n (选择 no) change console baud rate? y/n [n]: y (选择 yes) enter rate: 0 = 9600, 1 = 4800, 2 = 1200, 3 = 2400

4 = 19200, 5 = 38400, 6 = 57600, 7 = 115200 [7]: 0 (选择 0,改回用标准速率速率9600的

xmodem传输)

change the boot characteristics? y/n [n]: n (选择 no)

Configuration Summary enabled are: