履带板宽 1000 mm
履带接地长度 2920 mm
密封和润滑履带▲
该履带的节距、履带板数、履带板宽与普通的履带相同。
Inner and outer beam of track roller frame are rectangular section “八”frame .Track roller , carrier roller, idler are mounted with long life well sealed Duo-cone floating ring well sealed Duo-cone floating ring seal.
Number of track rollers:
Singe flange 4
Double flange 2
Number of carrier roller 2 on each side
Number of idler (each side) 1
Track type : triangle section, modular type Track adjuster type : by hydraulically adjust
Pitch: 203 mm
Number of shoes(each side) 42 pieces
Width of shoe 1000 mm
Length of track on ground 2920 mm
Sealed and lubricated track ▲
The pitch , numbers and width of track shoes are the same with the general track.
工作装置液压系统
Implement hydraulic system
由装置油泵、液压油箱及各种阀、油缸、滤油器和管路组成。
油泵型式 齿轮油泵
油泵流量 190 L/min
系统压力 11.76 MPa
单阀可实现铲刀油缸提升、封闭、下降和浮动。
It is composed of implement pump , hydraulic tank and various valves , cylinders , filters and lines .
Pump model gears oil pump
System output 190L/min
System pressure 11.76Mpa
Single valve control: it can complete the “raise, hold ,lower and float” of the blader cylinder.
底盘液压系统