Cisco路由器配置信息及口令的清除(8)

atively down down

Loopback0 193.251.121.157 YES TFTP up up

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z. Router(config)#int Ethernet0/0

Router(config-if)#no shut

Router(config-if)#

00:02:14: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up

00:02:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed state to up

Router(config-if)#int BRI0/0

Router(config-if)#no shut

Router(config-if)#

00:02:26: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down

00:02:26: %LINK-3-UPDOWN: Interface BRI0/0:2, changed state to down

00:02:26: %LINK-3-UPDOWN: Interface BRI0/0, changed state to up 00:02:115964116991: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0, TEI 68 changed to up

Router(config-if)#^Z

Router#

00:02:35: %SYS-5-CONFIG_I: Configured from console by console Router#copy run start

Destination filename [startup-config]?

Building configuration...

[OK]

Router#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE