cisco 6000 交换机配置维护手册(Native IOS)

6000交换机配置维护手册

(Native IOS)

中望商业机器有限公司 © 1992, 2002

Chinaweal Business Machinery Co., Ltd.

All Rights Reserve

目 录

1. 连接设备 ...................................................................................................... 3

1.1. 从CONSOLE连接 .................................................................................... 3

1.2. 远程TELNET连接 ................................................................................... 5

2. 基本信息配置 .............................................................................................. 5

2.1. 配置机器名、TELNET、密码 ................................................................... 5

2.2. 配置SNMP网管串 ................................................................................... 5

3. 冗余及系统高可用性配置............................................................................. 6

3.1. 同步SUPERVISOR ENGINE配置 ............................................................... 6

3.2. 查看SUPERVISOR ENGINE冗余 ............................................................... 7

3.3. 向冗余SUPERVISOR ENGINE拷贝IOS文件 ............................................. 8

4. 端口设置 ...................................................................................................... 9

4.1. 基本设置 ................................................................................................ 9

4.2. 配置三层端口 ....................................................................................... 10

5. 配置二层端口 ............................................................................................ 10

5.1. 配置TRUNK: ......................................................................................... 10

6. 配置HSRP ................................................................................................ 11

6.1. 配置二层普通交换接口......................................................................... 12

6.2. 清除二层接口配置 ................................................................................ 12

7. 配置VLAN ................................................................................................ 12

8. 动态路由协议--OSPF配置 ........................................................................ 13

8.1. 启用OSPF动态路由协议 .................................................................... 14

8.2. 定义参与OSPF的子网 .......................................................................... 14

8.3. OSPF区域间的路由信息汇总............................................................... 14

8.4. 配置密码验证 ....................................................................................... 15

8.5. 设置产生缺省路由 ................................................................................ 15

9. 交换机维护 ................................................................................................ 16

9.1. 交换机IOS保存和升级 ........................................................................ 16

9.2. 交换机密码恢复 ................................................................................... 16

1. 连接设备

1.1. 从console连接

第一次对6000交换机进行配置，必须从console进入。

首先先将机器上架，按要求接好电源，然后用随机附带的Console线和转接头将交换机的console口与PC的串口相联，如下：

Com口设置如下：

9600 baud

8 data bits No parity 2 stop bits

检查电源无误后，开电，可能会出现类似下面的显示，按黑粗体字回答:

System Bootstrap, Version 6.1(2)

Copyright (c) 1994-2000 by cisco Systems, Inc.

c6k_sup2 processor with 131072 Kbytes of main memory

rommon 1 > boot slot0:c6sup22-jsv-mz.121-5c.EX.bin

Self decompressing the image : #################################################

############################################################################### ############################################################################### ############################################################################### ###############################################################################

[OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) MSFC2 Software (C6MSFC2-BOOT-M), Version 12.1(3a)E4, EARLY DEPLOYMENT R ELEASE SOFTWARE (fc1)

Copyright (c) 1986-2000 by cisco Systems, Inc.

Compiled Sat 14-Oct-00 05:33 by eaarmas

Image text-base: 0x30008980, data-base: 0x303B6000

cisco Cat6k-MSFC2 (R7000) processor with 114688K/16384K bytes of memory.

Processor board ID SAD04430J9K

R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3 Cache

Last reset from power-on

X.25 software, Version 3.0.0.

509K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).

Press RETURN to get started!

--- System Configuration Dialog ---

Would you like to enter the initial dialog …… 此处隐藏：11634字，全部文档内容请下载后查看。喜欢就下载吧 ……