78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 Fax : 760-564-2414
1-800-831-4881 Email: sales@ Web:
5.0 SMDJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 170 Volts5000 Watt Peak Pulse Power
FEATURES
For surface mounted applications in order to optimize board space Low profile package Built-in strain relief
Glass passivated junction Low inductance
Excellent clamping capability
Repetition rate (duty cycle):0.01%
Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional types Typical IR less than 1µA above 10V High temperature soldering: 250°C/10 seconds at terminals
Plastic package has Underwriters Laboratory Flammability Classification 94 V-O
MECHANICAL DATA
Case: JEDEC DO214AB. Molded plastic over glasspassivated junction
Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)except Bidirectional
Standard Packaging: 16mm tape (EIA STD RS-481)Weight: 0.007 ounces, 0.021 grams)
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types 5.0SMDJ5.0 thru types 5.0SMDJ170 (e.g. 5.0SMDJ5.0C, 5.0SMDJ170CA)
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
Peak Pulse Power Dissipation on 10/1000 µs waveform (NOTE 1, 2, Fig.1)
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3)Peak Forward Surge Current, 8.3ms Single Half Sine-waveSuperimposed on Rated Load, (JEDEC Method)(Note2, 3)Operatings and Storage Temperature Range
SYMBOL
PPPM
IPPM
VALUE
Minimum 5000SEE TABLE 1
400-55 +150
UNITS
WattsAmpsAmps°C
IFSM
TJ, TSTG
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.Certified RoHS Compliant UL File # E223026