h3c er3260 交换机配置命令(8)

h3c er3260 交换机配置命令

display acl all

acl number acl-number match-order auto/config

acl-number (2000-2999 是基本acl 3000-3999是高级acl为管理员预留的编号)

rule deny/permit protocal

访问控制

[h3c] acl number 3000

[h3c-acl-adv-3000]rule permit tcp source 129.9.0.0 0.0.255.255 destination 202.38.160.0 0.0.255.255 destination-port eq 80 (

定义高级acl 3000,允许129.0.0/16网段的主机向202.38.160/24网段主机访问端口80)

rule permit source 211.100.255.0 0.255.255.255

rule deny cos 3 souce 00de-bbef-adse ffff-ffff-fff dest 0011-4301-9912 ffff-ffff-ffff

(禁止mac地址00de-bbef-adse发送到mac地址0011-4301-9912且802.1p优先级为3的报文通过)

display qos-interface GigabitEthernet1/0/1 traffic-limit 查看端口上流量

端口速率限制

line-rate inbound/outbound target-rate

inbound:对端口接收报文进行速率限制

outbound: 对端口发送报文进行速率限制

target-rate 对报文限制速率,单位kbps 千兆口 inbound范围1-1000000 outbound范围20-1000000

undo line-rate取消限速.

[h3c]interface GigabitEthernet1/0/1