路由器故障判断及排除(21)

36. 20314 packets output, 754513 bytes, 0 underruns

37. 0 output errors, 0 collisions, 0 interface resets, 0 restarts

38. 0 output buffer failures, 0 output buffers swapped out

39. 用"show ext ch 3/0 csna oper"显示CSNA通道连接设备状态.

40. "stat"替代"oper"获得CSNA通道连接设备的统计值.

41. 确认CSNA通道连接设备状态为"setupComplet".

42.

43.

44.

45.

46.

47.

Router#sh ext c3/0 csna Path Dv maxpiu time-delay length-delay CSNA 0100 E1 20470 10 20470 Router#sh ext c3/0 csna oper Path Dv Status SlowDown maxpiutime-delay length-delay CSNA 0100 E1 setupComplet off 20470 10 20470

48. 用"show ext ch 3/2 conn llc"命令确定SAPs值和CIP上打开的连接.

49. 确认定义在XCA中的正确的SAP值在CIP internal Token Ring LAN adapter中已打开.

50.

51.

52.

53.

54.

55. SHANXI2#sh ext c3/2 conn llc LAN Token 0 Adapter 1 5808.0100.0000 No SAPs open on this interface Total : SAPs opened = 0 Connections active = 0

56. 如果CSNA通道连接设备状态是"setupComplet",正确的SAP值(i.e.,SAP 08)打开在正确的CIP internal

57. MAC adapter上,进入第七步.否则,问题可能是PATH/DEVICE或XCA Major Node.请检查通道地址定义是否

58. 正确.若PATH/DEVICE正确,再在主机上"v

net,act,id=<xcamajnode>"命令确认XCA Major Node激活.

59. Router#sh ext c3/0 csna oper